## Summary
- Replace per-request DNS resolution (variable-based `proxy_pass`) with static `upstream` blocks and `keepalive` connection pools
- Reuses TLS connections through the Tailscale tunnel instead of handshaking per request
- Add `mise run fly-reload` for nginx config reload without full redeploy (re-resolves upstream DNS)
## Trade-off
DNS is resolved at config load, not per-request. If Tailscale Ingress pods get new IPs (restart, reschedule), `mise run fly-reload` is needed. A Grafana alert will be added to detect this.
## Still TODO on this branch
- [ ] Grafana alert for upstream unreachable (triggers fly-reload reminder)
- [ ] Docs pass
- [ ] Deploy from branch and verify latency improvement
- [ ] Changelog fragment
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Reviewed-on: #337
Was sending Connection: upgrade on every proxied request, which is
semantically wrong for normal HTTP traffic. Use a map to conditionally
send 'upgrade' only when the client requests a WebSocket switch,
'close' otherwise.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Previous max bucket was 10s — all slower requests collapsed into +Inf,
making p50/p90/p99 unreadable during the Forgejo archive DoS.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Crawlers follow auth redirects to /user/login which is pointless for them.
Saves round-trips for both sides.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Facebook has been scraping forge mirror repos at ~3-4 req/s, slowing
down the Forgejo instance. Serve robots.txt directly from nginx to
disallow /mirrors/ while leaving eblume/* accessible to crawlers.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Tailscale :stable pulled v1.96.5 during last deploy, which returns
SERVFAIL for tailnet DNS names (no upstream resolvers set). This broke
all public routing (forge/docs/cv.eblu.me) through the Fly proxy.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The general rate limit zone used $binary_remote_addr (Fly's internal
proxy IP), causing all external clients to share one bucket. Switch to
$http_fly_client_ip to match forge_auth's correct behavior.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The Fly container pulls from tailscale/tailscale:stable which is still
v1.94.2. The `tailscale wait` command doesn't exist until v1.96.2.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
## Summary
- Bump Tailscale operator, proxy containers, and init containers from v1.94.2 to v1.96.3 across both clusters (indri + ringtail via shared base kustomization)
- Replace hand-rolled `until tailscale status` polling loop in `fly/start.sh` with `tailscale wait --timeout 60s` (new in v1.96.2)
- Stamp kube-state-metrics review date (already current at v2.18.0)
## Notable upstream changes (v1.94.2 → v1.96.3)
- Go upgraded from 1.25 to 1.26
- `tailscale wait` command — blocks until daemon is running + interface has IP
- AuthKey policy now applies only when users are not logged in (behavioral change)
- Peer Relay improvements (metrics, EC2 IMDS, UDP socket scaling)
- UPnP stability fixes
## Deploy plan
1. Merge PR
2. Sync tailscale-operator on indri: `argocd app sync tailscale-operator`
3. Sync tailscale-operator on ringtail: `argocd app sync tailscale-operator-ringtail --server ringtail...`
4. Verify proxy pods roll with new image: `kubectl --context=minikube-indri -n tailscale get pods`
5. Verify ingress connectivity (spot-check a few `*.tail8d86e.ts.net` services)
6. Rebuild + deploy Fly proxy container (separate step, picks up `tailscale wait` change)
## Test plan
- [ ] ArgoCD diff looks clean for both apps before sync
- [ ] Proxy pods on indri come up healthy with v1.96.3 images
- [ ] Proxy pods on ringtail come up healthy with v1.96.3 images
- [ ] Tailscale ingress services remain reachable (e.g., grafana, prometheus)
- [ ] Fly proxy rebuild deploys successfully with `tailscale wait`
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Reviewed-on: #304
## Summary
- Remove `match_all = true` from `flyio_nginx_cache_requests_total` in Alloy so the metric only counts requests that go through the proxy cache (excludes health checks with empty `cache_status`)
- Change dashboard queries from `rate(...[5m])` to `increase(...[$__range])` — aggregates over the full dashboard time window instead of a 5-minute sliding window, giving meaningful ratios for low-traffic static sites
- Add null/NaN value mapping to show "No traffic" in neutral color instead of blank/red
## Root cause
Health check requests from Fly.io hit the default nginx server block (no `proxy_cache`), producing entries with empty `upstream_cache_status`. With `match_all = true`, these were counted in the cache metric, diluting the Fly.io dashboard ratio. For APM dashboards, `rate()[5m]` on low-traffic sites with 24h cache validity almost always returns either all-HITs (100%) or no data (blank → red background).
## Deployment
- Fly.io proxy redeploy needed for Alloy config change
- ArgoCD sync for dashboard ConfigMap changes
## Test plan
- [ ] Redeploy Fly.io proxy
- [ ] Sync grafana-config in ArgoCD
- [ ] Verify CV APM cache hit ratio shows a real percentage (not 100%)
- [ ] Verify Docs APM shows "No traffic" in neutral color when idle, real ratio when visited
- [ ] Verify Fly.io proxy dashboard cache ratio excludes health checks
Reviewed-on: https://forge.ops.eblu.me/eblume/blumeops/pulls/177
## Summary
- Bump Fly.io proxy VM memory from 256MB to 512MB — Alloy was OOM-killed, causing the Grafana Fly.io dashboard to lose metrics
- Fix TruffleHog pre-commit hook to scan only staged changes (`--since-commit HEAD`) instead of full repo history
- Sanitize example credential URL in Reolink camera plan doc
## Deployment and Testing
- [ ] Fly.io deploy triggers automatically on merge (workflow watches `fly/**`)
- [ ] After deploy, verify Alloy is running: `fly ssh console -a blumeops-proxy -C "ps aux"` should show alloy process
- [ ] Grafana Fly.io dashboard should start populating within ~1 minute
Reviewed-on: https://forge.ops.eblu.me/eblume/blumeops/pulls/152
## Summary
- Adds a branded 503 error page served when upstreams are unreachable (indri offline, Tailscale tunnel down, emergency shutoff, etc.)
- Stale cache is still served first when available (`proxy_cache_use_stale` takes priority)
- Test endpoint at `docs.eblu.me/_error` to preview the page without killing upstreams
- `proxy_intercept_errors on` also catches error responses returned by the upstream itself
## Files Changed
- `fly/error.html` — Self-contained error page (dark theme, links to BlumeOps repo)
- `fly/nginx.conf` — `error_page`, `internal` location, `/_error` test location, `proxy_intercept_errors`
- `fly/Dockerfile` — COPY error.html into image
## Test Plan
- [ ] Deploy to Fly.io
- [ ] Visit `docs.eblu.me/_error` to verify the page renders
- [ ] Optionally stop indri/Tailscale to confirm the page shows on real 502/503/504
Reviewed-on: https://forge.ops.eblu.me/eblume/blumeops/pulls/133
## Summary
- Start nginx after Tailscale connects (community best practice for Tailscale sidecars)
- Switch to `bluegreen` deploy strategy — old machine serves until new one is healthy
- Replace top-level `[checks]` with `[[http_service.checks]]` — only service-level checks gate traffic routing ([confirmed by Fly.io staff](https://community.fly.io/t/clarifying-the-types-of-health-checks/20379))
- Remove sentinel file and nginx if-check (no longer needed)
Supersedes the approach in #131 — that helped (502 window dropped from ~30s to ~3s) but couldn't fully eliminate it because top-level checks don't gate routing and Fly.io's proxy sends traffic as soon as the port is reachable.
## Deployment and Testing
- [ ] Merge and `fly deploy` from `fly/` directory
- [ ] Verify deploy completes with zero 502s (watch `fly logs` and Grafana docs-apm)
- [ ] Confirm `fly checks list` shows the new service-level check passing
Reviewed-on: https://forge.ops.eblu.me/eblume/blumeops/pulls/132
## Summary
- Health check (`/healthz`) now returns 503 until Tailscale is connected
- `start.sh` creates `/tmp/tailscale-ready` sentinel after `tailscale up` succeeds
- Fly.io keeps the old machine serving traffic during the ~7s startup window
Previously, nginx passed the health check immediately, Fly.io routed traffic to the new machine, but MagicDNS wasn't available yet — causing upstream DNS timeouts and 502s on every request until Tailscale connected.
## Deployment and Testing
- [ ] Merge and `fly deploy` from `fly/` directory
- [ ] Verify deploy completes with zero 502s (check Grafana docs-apm dashboard)
- [ ] Confirm health check transitions from 503 → 200 in `fly logs`
Reviewed-on: https://forge.ops.eblu.me/eblume/blumeops/pulls/131
## Summary
- Add `client_ip` field to the Fly.io nginx JSON log format, sourced from `Fly-Client-IP` header
- Extract `client_ip` in the Alloy pipeline so it's available as a parsed field in Loki
- Keeps `remote_addr` (the internal proxy IP) for debugging
Fixes: Grafana access logs for docs.eblu.me showing 172.16.11.178 for every request instead of real visitor IPs.
## Deployment and Testing
- [ ] Deploy updated fly.io proxy: `fly deploy` from `fly/` directory
- [ ] Verify in Grafana that new log lines include `client_ip` with real IPs
- [ ] Confirm `remote_addr` still shows the proxy IP (preserved for debugging)
Reviewed-on: https://forge.ops.eblu.me/eblume/blumeops/pulls/130
## Summary
- Start nginx before Tailscale in `start.sh` so port 8080 is bound immediately, eliminating the "app is not listening on the expected address" WARNING during `fly deploy`
- Switch `proxy_pass` to use a variable with `resolver 100.100.100.100 valid=30s` so nginx can start without resolving MagicDNS names at config load time
- DNS results cached 30s per worker — no per-request lookup overhead
## Context
The WARNING was a race condition: Fly checks for listeners right after the machine starts, but `start.sh` ran ~5-10s of Tailscale setup before starting nginx. The health check always passed later, but the warning was noisy.
## Test plan
- [ ] Merge and let the deploy-fly workflow trigger
- [ ] Check runner logs for absence of the WARNING
- [ ] Verify `docs.eblu.me` still serves correctly
- [ ] Verify `/healthz` still passes
Reviewed-on: https://forge.ops.eblu.me/eblume/blumeops/pulls/128
## Summary
- Introduce `tag:flyio-target` so services must explicitly opt in to be reachable by the fly.io proxy
- Replace broad `tag:k8s` and `tag:homelab` grants with the new tag in the ACL rule and test
- Add `tailscale.com/tags: "tag:k8s,tag:flyio-target"` annotation to docs, loki, and prometheus Ingresses
- Switch Alloy push endpoints from `*.ops.eblu.me` (Caddy) to `*.tail8d86e.ts.net` (Tailscale Ingress)
- Update docs: flyio-proxy, caddy, tailscale, forgejo (future public access + security checklist), expose-service-publicly
## Manual step (not in PR)
Update the k8s operator OAuth client in the Tailscale admin console to include `tag:flyio-target` in its scope. Without this, the operator cannot assign the new tag to Ingress proxy nodes.
## Deployment order
1. **Pulumi ACLs** — `mise run tailnet-preview && mise run tailnet-up`
2. **OAuth client** — Manual update in Tailscale admin console
3. **K8s Ingresses** — `argocd app sync apps && argocd app sync docs loki prometheus`
4. **Fly.io proxy** — `mise run fly-deploy`
5. **Verify** — `mise run services-check`, check Grafana dashboards
## Test plan
- [ ] `mise run tailnet-preview` shows clean diff
- [ ] `argocd app diff docs`, `argocd app diff loki`, `argocd app diff prometheus` show only annotation additions
- [ ] After deploy: Grafana dashboards show continued log/metric flow
- [ ] `curl -sf https://docs.eblu.me` returns 200
- [ ] `mise run services-check` passes
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Reviewed-on: https://forge.ops.eblu.me/eblume/blumeops/pulls/126
## Summary
- Adds a Fly.io reverse proxy (`blumeops-proxy`) that tunnels public traffic to homelab services over Tailscale
- First service exposed: `docs.eblu.me` — the Quartz static docs site
- Includes Pulumi IaC for Tailscale auth key/ACLs and Gandi DNS CNAME
- Adds mise tasks (`fly-deploy`, `fly-setup`, `fly-shutoff`) and Forgejo CI workflow
## Key details
- Fly.io Firecracker VMs support TUN devices natively — no userspace networking needed
- Tailscale auth key is `preauthorized=True` to avoid device approval hangs on container restarts
- nginx caches aggressively for the static site; health check is on the default_server block
- ACLs restrict `tag:flyio-proxy` to `tag:k8s` on port 443 only
- DNS CNAME deployed and verified: `docs.eblu.me` → `blumeops-proxy.fly.dev`
## Test plan
- [x] `curl -sf https://blumeops-proxy.fly.dev/healthz` returns `ok`
- [x] `curl -I -H "Host: docs.eblu.me" https://blumeops-proxy.fly.dev/` returns 200 with `X-Cache-Status`
- [x] `curl -I https://docs.eblu.me/` returns 200 with valid Let's Encrypt cert
- [x] `dig forge.ops.eblu.me` still resolves to 100.98.163.89 (private services unaffected)
- [x] Set `FLY_DEPLOY_TOKEN` Forgejo Actions secret for CI auto-deploy
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Reviewed-on: https://forge.ops.eblu.me/eblume/blumeops/pulls/120
