a87c997ee1
Expose Forgejo publicly at forge.eblu.me ( #278 )
...
Deploy Fly.io Proxy / deploy (push) Successful in 1m28s
## Summary
Expose Forgejo publicly at `forge.eblu.me` via the Fly.io reverse proxy — the first dynamic, authenticated public-facing service.
- **Forgejo hardening:** Domain changed to forge.eblu.me, SSH stays on forge.ops.eblu.me, reverse proxy trust headers configured, local registration locked to external-only (Authentik SSO)
- **Tailscale Ingress:** ExternalName Service + Ingress in tailscale-operator creates forge.tail8d86e.ts.net endpoint
- **Fly.io proxy:** nginx server block with rate-limited auth endpoints (3r/s), fail2ban with custom nginx-deny action, security headers, /swagger blocked, WebSocket support, 512m body limit
- **Authentik:** OAuth callback updated to forge.eblu.me
- **DNS/TLS:** CNAME record in Pulumi, cert in fly-setup
- **Rename:** ~29 files updated from forge.ops.eblu.me to forge.eblu.me (HTTPS refs only; SSH, container builds, and Caddy table kept as-is)
## Deployment Order
1. `mise run provision-indri -- --tags forgejo` (config changes)
2. Verify forge.ops.eblu.me still works
3. `argocd app set tailscale-operator --revision feature/forge-public && argocd app sync tailscale-operator`
4. Verify `curl https://forge.tail8d86e.ts.net `
5. `cd fly && fly deploy`
6. Verify pre-DNS: `curl -H "Host: forge.eblu.me" https://blumeops-proxy.fly.dev/ `
7. `fly certs add forge.eblu.me -a blumeops-proxy`
8. `argocd app set authentik --revision feature/forge-public && argocd app sync authentik`
9. `mise run dns-preview && mise run dns-up`
10. Full verification (see below)
11. Rehearse `mise run fly-shutoff`
12. After merge: reset ArgoCD revisions to main, re-sync
## Verification Checklist
- [ ] forge.eblu.me loads, shows public repos
- [ ] forge.ops.eblu.me still works from tailnet
- [ ] SSH clone via forge.ops.eblu.me:2222 works
- [ ] HTTPS clone via forge.eblu.me works
- [ ] UI shows forge.eblu.me for HTTPS clone, forge.ops.eblu.me for SSH
- [ ] /swagger returns 403
- [ ] Rapid login attempts trigger 429 rate limit
- [ ] fail2ban bans after 5 failed logins in 10 minutes
- [ ] ArgoCD can still sync (SSH unaffected)
- [ ] `mise run fly-shutoff` stops all public traffic
- [ ] `mise run services-check` passes
Reviewed-on: #278
2026-03-03 08:40:41 -08:00
61ca1ca305
Deploy Tailscale operator on ringtail k3s cluster ( #215 )
...
## Summary
- Extract shared Tailscale operator resources (CRDs, RBAC, Deployment, ProxyClass, DNSConfig) into `tailscale-operator-base/` so both clusters reference the same manifests
- Add `tailscale-operator-ringtail/` overlay with 1-replica ProxyGroup and ExternalSecret for the shared OAuth client
- Add ArgoCD Application targeting `ringtail.tail8d86e.ts.net:6443`
- Update `.yamllint.yaml` ignore path for the moved `operator.yaml`
## Deployment and Testing
- [ ] Sync `apps` app to pick up the new Application definition
- [ ] `argocd app sync tailscale-operator-ringtail`
- [ ] Verify ExternalSecret syncs: `kubectl --context=k3s-ringtail -n tailscale get externalsecret`
- [ ] Verify operator pod runs: `kubectl --context=k3s-ringtail -n tailscale get pods`
- [ ] Verify ProxyGroup ready: `kubectl --context=k3s-ringtail -n tailscale get proxygroups`
- [ ] Verify indri operator still works: `argocd app diff tailscale-operator`
- [ ] Check Tailscale admin for new operator device with `tag:k8s-operator`
🤖 Generated with [Claude Code](https://claude.com/claude-code )
Reviewed-on: https://forge.ops.eblu.me/eblume/blumeops/pulls/215
2026-02-19 09:33:05 -08:00
e6cf7e47e0
Restrict flyio-proxy ACLs to dedicated tag:flyio-target endpoints ( #126 )
...
Deploy Fly.io Proxy / deploy (push) Successful in 1m8s
## Summary
- Introduce `tag:flyio-target` so services must explicitly opt in to be reachable by the fly.io proxy
- Replace broad `tag:k8s` and `tag:homelab` grants with the new tag in the ACL rule and test
- Add `tailscale.com/tags: "tag:k8s,tag:flyio-target"` annotation to docs, loki, and prometheus Ingresses
- Switch Alloy push endpoints from `*.ops.eblu.me` (Caddy) to `*.tail8d86e.ts.net` (Tailscale Ingress)
- Update docs: flyio-proxy, caddy, tailscale, forgejo (future public access + security checklist), expose-service-publicly
## Manual step (not in PR)
Update the k8s operator OAuth client in the Tailscale admin console to include `tag:flyio-target` in its scope. Without this, the operator cannot assign the new tag to Ingress proxy nodes.
## Deployment order
1. **Pulumi ACLs** — `mise run tailnet-preview && mise run tailnet-up`
2. **OAuth client** — Manual update in Tailscale admin console
3. **K8s Ingresses** — `argocd app sync apps && argocd app sync docs loki prometheus`
4. **Fly.io proxy** — `mise run fly-deploy`
5. **Verify** — `mise run services-check`, check Grafana dashboards
## Test plan
- [ ] `mise run tailnet-preview` shows clean diff
- [ ] `argocd app diff docs`, `argocd app diff loki`, `argocd app diff prometheus` show only annotation additions
- [ ] After deploy: Grafana dashboards show continued log/metric flow
- [ ] `curl -sf https://docs.eblu.me ` returns 200
- [ ] `mise run services-check` passes
🤖 Generated with [Claude Code](https://claude.com/claude-code )
Reviewed-on: https://forge.ops.eblu.me/eblume/blumeops/pulls/126
2026-02-08 21:54:18 -08:00
351528474c
Add ExternalSecrets for remaining k8s secrets
...
Migrate 10 secret templates to ESO ExternalSecrets with 1Password Connect:
- databases: eblume, borgmatic, teslamate passwords
- tailscale-operator: OAuth client credentials
- grafana-config: admin password, teslamate datasource
- teslamate: db password, encryption key
- forgejo-runner: runner registration token
- argocd: forge SSH credentials
All use creationPolicy: Merge for safe migration from existing secrets.
Skipped:
- miniflux/secret-db: Uses CNPG secret, not 1Password directly
- immich/secret-db: Requires 1Password item creation first
- 1password-connect: Bootstrap secret, must stay as template
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
2026-01-28 19:50:38 -08:00
a8f4d00294
K8s Migration Phase 1: Infrastructure Setup ( #29 )
...
## Summary
- Split k8s migration plan into phases folder for easier navigation
- Added `tag:k8s` to Pulumi ACLs for Kubernetes workloads
- Phase 1 work in progress
## Phase 1 Goals
- Tailscale Kubernetes Operator
- CloudNativePG Operator
- PostgreSQL cluster for future app migrations
## Deployment and Testing
- [ ] Review Phase 1 plan
- [ ] `mise run tailnet-preview` to verify ACL changes
- [ ] `mise run tailnet-up` to apply ACL changes
- [ ] Create Tailscale OAuth client (manual)
- [ ] Deploy operators and PostgreSQL cluster
🤖 Generated with [Claude Code](https://claude.com/claude-code )
Reviewed-on: https://forge.tail8d86e.ts.net/eblume/blumeops/pulls/29
2026-01-19 09:49:52 -08:00
